File list

From The Relativty Wiki

This special page shows all uploaded files.

File list
Date Name Thumbnail Size Description Versions
08:31, 10 May 2019 MPU9250-0x71-found.jpg (file) 92 KB Genuine MPU-9250 chip 1
19:04, 25 April 2019 MPU9250-0x73.png (file) 25 KB The Serial Monitor readout after you have updated the WHOAMI_DEFAULT_VALUE in your library files 1
19:02, 25 April 2019 MPU9250-0x71.png (file) 12 KB The Serial Monitor readout for a 9255 chip. 1
09:54, 25 April 2019 MPU-9250.png (file) 333 KB An MPU-9250 Sensor Board 1
14:28, 2 April 2019 MPU-6050.png (file) 130 KB An MPU-6050 using the straight pins 2
16:51, 30 March 2019 MPU6050.jpg (file) 59 KB An MPU-6050 with right angle pins 1
21:55, 27 March 2019 Blackpill MPU6050.png (file) 220 KB A Black Pill board with an MPU-6050 connected 1
21:10, 27 March 2019 St util blue128 hl.png (file) 42 KB Note the 128k 1
21:54, 26 March 2019 Blackpill good tracker flash.png (file) 45 KB A good compile and sketch upload for a Black Pill 1
20:29, 26 March 2019 Bootloader correct jumper.png (file) 27 KB Boot0 Jumper set High 1
20:28, 26 March 2019 Bootloader wrong jumper.png (file) 15 KB Boot0 Jumper set Low 1
19:43, 26 March 2019 Boot0 low.png (file) 1.4 MB The Boot0 jumper set Low (normal) 1
19:41, 26 March 2019 Boot0 high.png (file) 1.6 MB The Boot0 jumper set High (flashable) 1
11:44, 26 March 2019 Pathbar2.png (file) 29 KB The full path is now displayed 2
11:43, 26 March 2019 Pathbar1.png (file) 29 KB Click in the whitespace (not on a word) 2
10:56, 26 March 2019 St util Blackpill hl.png (file) 46 KB Note the 64k 1
10:55, 26 March 2019 St util badblue hl.png (file) 48 KB Note the 32k 1
10:35, 26 March 2019 St util found bootloader.png (file) 37 KB The ST-Link Utility Message when the STM32 has a bootloader already 1
10:05, 26 March 2019 St util no bootloader.png (file) 25 KB ST-Link Utility Message 1
10:04, 26 March 2019 St util connect.png (file) 18 KB ST-Link Utility Connect Button 1
09:16, 25 March 2019 Board part no.png (file) 14 KB The Board Part Number section drop down menu 1
22:18, 24 March 2019 Toolsblue.png (file) 15 KB Arduino Tools Menu for the Blue Pill Board 1
22:17, 24 March 2019 Toolsblack.png (file) 15 KB Arduino Tools Menu for the Black Pill Board 1
22:12, 24 March 2019 Testcompile.png (file) 6 KB testing that your first compile works 1
20:01, 24 March 2019 Boardsmgrstm32.png (file) 22 KB Boards Manager STM32 install 1
22:03, 22 March 2019 Boardmanager.png (file) 19 KB The Arduino IDE Boards Manager window showing the STM32 board installer 1
20:09, 22 March 2019 Stlinktype2.jpg (file) 95 KB ST-Link v2 (type 2) 1
20:09, 22 March 2019 Stlinktype1.jpg (file) 19 KB ST-Link v2 (type 1) 1
19:49, 22 March 2019 Stlinkwired.jpg (file) 98 KB An STM32 board with the debug header pins wired into an ST-Link USB adapter 1
19:47, 22 March 2019 Stlinksoldered.jpg (file) 88 KB An STM32 board (with no side header pins) soldered to Dupont patch cables, connected to an MPU-6050 sensor board 1
19:45, 22 March 2019 Stlinkpins.jpg (file) 51 KB An ST-Link v2 showing pins 1
19:44, 22 March 2019 Mpu6050.jpg (file) 102 KB An MPU-6050 sensor showing pins 1
19:43, 22 March 2019 Flashkit.jpg (file) 189 KB An STM32 board, and ST-Link and 4 Dupont patch cables 1
10:29, 22 March 2019 Headerpins.png (file) 133 KB STM32 Header Pins requiring soldering to both sides of the board 1
10:28, 22 March 2019 Bluepillround.png (file) 1.26 MB An STM32 Blue Pill board with a round reset switch 1
10:27, 22 March 2019 Bluepillrect.png (file) 505 KB An STM32 Blue Pill board with a rectangular reset switch 1
10:25, 22 March 2019 Blackpill.png (file) 1.34 MB A RobotDyn STM32 Black Pill board 1