To build the Relativty headset, we will need some hardware. On this page we will tell you what hardware you will need, and some additional information about it.
We use a STM32 in our VR headset, to process the data from the MPU9250, and send it to the PC.
We use a MPU9250 in our VR headset, to track your head movements, and send this data to SteamVR.
2K screen + board
The screen in our VR headset is a LS055R1SX03 5.5" 2k (2560x1440) LCD
The lenses in our VR headset are Fresnal Lenses with a focal lenght of 80mm.
3D printed parts
The model of our VR headset is 3D printed. You dont have to use the 3D printed model. You can also use a VR headset for a mobile phone, as long as a 5.5" screen fits inside it.